How to Set Up a 5 Poles Kids Teepee Tent - Step-by-Step Guide

What’s included

Your teepee set includes:

• teepee fabric cover
• 10 wooden pole sections (to create 5 full-length poles)
• 2 cotton ties on top
• wooden stabilizer
• storage bag
• decorative wooden feathers
• floor mat (if included in your selected set)

Step 1 - Assemble the poles

Connect the wooden pole sections to create 5 full-length poles.
Make sure each connection is fully tightened before moving to the next step.

Step 2 - Insert the poles into the fabric

Slide each assembled pole into the fabric sleeves inside the teepee cover.
Important: the drilled holes in the poles must remain at the top.

Step 3 - Secure the top

Lay the teepee flat on the floor.
Thread the first cotton tie through the holes in 3 poles, wrap it around them, and tie loosely.
Then thread the second cotton tie through the remaining 2 poles, wrap it around them, and tie loosely.
Do not tighten fully yet - you’ll need some flexibility for shaping the teepee.

Step 4 - Raise the teepee

Carefully stand the teepee upright and spread the poles evenly to create the correct shape.
Adjust the spacing until the structure looks balanced.

Step 5 - Install the stabilizer

Insert the wooden stabilizer between the poles at the top.
This locks the structure in place and helps keep your teepee stable.

Important: the poles must cross in the correct direction, as shown in the photo or video guide.
If positioned incorrectly, the stabilizer may not fit properly.

Step 6 - Final adjustments

Once the teepee is standing correctly:

• tighten the cotton ties securely
• adjust the spacing between the poles
• spread the base evenly for a symmetrical shape

If you'd like the fabric to sit lower and reach the floor more fully, slightly loosen the top ties and readjust the pole spacing.

Step 7 - Add finishing touches

Place the floor mat inside (if included), arrange the front opening, and decorate your teepee with the included wooden feathers or your own favorite accessories.

Your cozy play space is ready.

Troubleshooting

The teepee looks uneven
→ Check that the poles are spread evenly and crossing correctly.

The stabilizer doesn’t fit
→ The poles are likely positioned incorrectly. Recheck Step 5.

The fabric doesn’t reach the floor
→ Loosen the top ties slightly and adjust the pole spacing.

The poles feel unstable
→ Make sure all pole connections are fully tightened and the stabilizer is installed correctly.

Safety note

Adult assembly is recommended.
Please check the teepee regularly to ensure all parts remain securely fastened.

Video set up manual you can find here.